[Click image for a larger version.]
28 boxes Rockfon Pacific E15 600X600X15mm Tegular Tiles

Technical dataSound absorptionSound absorption data has been measured in accordance with ISO 354. Sound absorption data áp, áw and absorption class are calculated in accordance with ISO 11654. Noise Reduction Coefficient (NRC) is calculated in accordance with ASTM C423. For sound absorption details, click an assortment line in the table above. Fire performanceGeneral Rockfon ceiling tiles have a core of stone wool. Stone wool is non-combustible with a melting point of more than 1000°C. Reaction to fire Class A1 in accordance with EN 13501-1. Fire protectionThe fire resistant properties of stone wool ensure Rockfon ceiling tiles provide fire protection in construction. The fire protection properties of Rockfon ceilings have been tested and classified against European norm EN 13501-2 and/or national norms depending on requirements in national building codes. Some sizes and edge details of Pacific can be used with various RockLink grid systems to create a 30 minutes fire protecting ceiling in accordance with BS 476 Part 21 and Part 23. They can also be used to create a 30 minutes fire protecting membrane ceiling (integrity only) in accordance with BS 476 Part 22. Humidity resistance and dimensional stability (flexural tensile strength)Rockfon ceiling tiles are dimensionally stable even at humidity levels of up to 100% RH and can be installed at all temperatures ranging from 0°C to 40°C. No acclimatisation is necessary. Pacific is predominantly classified as class 1/C/0N in accordance with EN 13964. However, certain module sizes (width > 700 mm) are class 2/C/0N. Light reflectionWhite: 85% diffuse light reflection in accordance with ISO 7724-2. HygieneStone wool has no nutritional value and therefore it provides no sustenance to harmful micro-organisms. CleaningThe surface can be vacuum cleaned with a soft brush attachment. AftercareThe tiles can be post factory treated with a re-finishing paint, e.g. a PVA water based latex paint. The paint should be applied with an airless spray in a low amount (no brushing or rolling). Rockfon advises the use of the smallest amount of paint in order to minimise reduction in sound absorption. The surface of the tiles must be clean and dry and the existing paint surface must be firmly adhered to the tile prior to refinishing. Heavily discoloured tiles should be replaced. Disclaimer: The application of refinishing paint will influence acoustic properties and fire safety performance. Rockfon takes no responsibility for these properties after treatment. EnvironmentA representative selection of Rockfon products have been awarded the Indoor Climate Label and the Finnish Indoor Climate label (M1). Pacific is recyclable.

Price:
£1008.00 (excl. VAT)
28no boxes per pallet 3.6m2 10no tiles per box

Quantity *


Email a friend about this product...

To email a friend information about this item, just complete the information on the right then click the 'Send' button. * - Denotes a required field.

 
Your First Name *

 Your Last Name *
Your Email Address *

 Friend's Email Address *